Potential signs that your roof may need to be replaced: Shingle edges are curled or shingle tabs are cupped. Bald spots where granules are missing. Cracked shingles. Your roof is at least 20 years old; while many shingles today are produced for durability, many factors can accelerate the aging of shingles.
The price of a new roof system varies widely, depending on such things as the materials selected, contractor doing the work, home or building, location of the home or building, local labor rates and time of year. To get a good idea of price for your roof system, get a free roofing inspection and estaimte from reputable contractor. Keep in mind that price is only one factor, and it must be balanced with the quality of the materials and workmanship.
If one estimate seems much lower than the others and it sounds too good to be true, it probably is. Many fly-by-night contractors' below-cost bids seem attractive, but these contractors often are uninsured and perform substandard work. If an estimate is confusing, ask the contractor to break down the estimate into items/terms you can understand.
There are no specific temperature guidelines regarding when it is too cold to install asphalt shingles. Asphalt shingles do become brittle in cold temperatures, with fiberglass shingles more likely to break than organic shingles. Breakage can be minimized or eliminated if the shingles are stored in a warm area and loaded onto the roof a few bundles at a time. Another concern is that the self-sealing strips will not seal or bond sufficiently in cold temperatures. Hand-tabbing (the application of quarter-size dabs of adhesive to the underside of shingles) is recommended if the building is located in an area prone to high winds. This will help prevent the shingles from blowing off the roof until warmer weather arrives and the sealing strips can set properly.
You have two basic options: You can choose a complete replacement of the roof system, involving a tear-off of your existing roof system, or re-cover the existing roof system, involving only the installation of a new roof system. If you've already had one re-cover installed on your original roof system, check with a professional roofing contractor. In many instances, building code requirements allow no more than one roof system re-cover before a complete replacement is necessary.
Most new roof systems are designed to provide useful service for about 20 years. Actual roof system life span is determined by a number of factors, including local climatic and environmental conditions, proper building and roof system design, material quality and suitability, proper application and adequate roof maintenance. Roofing product manufacturers offer a variety of warranties on their products. Take a close look at those warranties to see what responsibilities and financial obligations manufacturers will assume if their products fail to reach their expected lives.
NRCA recommends galvanized steel or the equivalent corrosion-resistant roofing nails for asphalt shingle installation. Also, verify the governing building code requirements and what the shingle manufacturer recommends.
All too often, roof system problems are discovered after leaking or other serious damage occurs. Periodic (twice-a-year) inspections often can uncover cracked, warped or missing shingles; loose seams and deteriorated flashings; excessive surface granules accumulating in the gutters or downspouts; and other visible signs of roof system problems. Indoors, look for cracked paint, discolored plasterboard and peeling wallpaper as signs of damaged roof areas.
Not necessarily. Leaks can result from flashings that have come loose or a section of the roof system being damaged. A complete roof system failure, however, generally is irreversible and a result of improper installation or choice of materials or the roof system installation is inappropriate for the home or building.
Most work should not be done yourself. Professional roofing contractors are trained to safely and efficiently repair or replace roof systems. You can damage your roof system by using improper roofing techniques and severely injure yourself by falling off or through the roof. Maintenance performed by home and building owners should be confined to inspecting roof systems during the fall and spring to check for cracked or curling shingles and cleaning gutters filled with dead leaves and other debris. If you must inspect your roof system yourself, use a firmly braced or tied-off ladder equipped with rubber safety feet. Wear rubber-soled shoes and stay on the ladder (and off the roof system), if possible.
Remove as much snow as possible, but call a professional roofing contractor if your roof is steep, the snow is deep or the ice is thick. NRCA does not recommend using ice picks or shovels (or any tool with sharp edges) because there is a chance of damaging roof coverings and flashings. NRCA also does not recommend hosing down a roof with water or use of a hot air gun. Electric heat cables generally have limited effectiveness.